Geomag Wik…

Editing

Suspended Circle

1
  • The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit. If you are undoing an edit that is …
Latest revision Your text
Line 1: Line 1:
 
== Definition ==
 
== Definition ==
{{Geomag-construction|PageTitle=Suspended Circle|Title=Suspended Circle|Filename=Suspended_Circle.jpg|Type=[[Suspended Circle|Abstract]]|Squares=44|Rods=353|Spheres=131|Author=[[User:Jeffkoslo|Jeffkoslo]] 22:05, 3 May 2007 (UTC)}}
+
{{Geomag-construction|Title=Suspended Circle|Filename=Suspended_Circle.jpg|Type=[[Suspended Circle|Abstract]]|Squares=44|Rods=353|Spheres=131|Author=[[User:Jeffkoslo|Jeffkoslo]] 22:05, 3 May 2007 (UTC)}}
   
 
A fully suspended closed circle on two support legs. The loop is composed of 34 segments, alternating trianges with pyramids.
 
A fully suspended closed circle on two support legs. The loop is composed of 34 segments, alternating trianges with pyramids.
Line 11: Line 11:
 
#* Keep the two sides balanced as you are building upwards.
 
#* Keep the two sides balanced as you are building upwards.
 
{{clr}}
 
{{clr}}
== Calculations ==
 
Let alpha = arcsin(1/sqrt(3)) = 35.264 degrees, be the semi-apex angle of an equilateral square-based prism.
 
 
(A mnemonic for this is that the inclination of a face is 54.7 degrees, which is the complement, and is half the well-known "bond angle of methane" at 109 degrees 28 minutes, which I've always remembered for some reason).
 
 
Then each segment of the curve moves through 2*alpha - 60 degrees = 10.528 degrees
 
 
So, 34 segments move through 357 degrees, which is just 3 degrees short of a complete circle, and easily close enough for the structure to absorb the error.
 
 
 
== Examples ==
 
== Examples ==
 
<gallery>
 
<gallery>
Line 30: Line 21:
 
Image:SS_6.JPG|Alternate view
 
Image:SS_6.JPG|Alternate view
 
</gallery>
 
</gallery>
 
== Other Builder Notes ==
 
 
I just built this for the first time: boy it's tricky! It collapsed a couple of times on me before I hit on the idea of supporting the base of the arc during construction. I used a book, and opened just enough pages to offer firm support to the base panel.
 
 
With just five panels to go, I built the last five segments 'off piste', then dropped it in place (with the help of an assistant).
 
 
I'm excited to report that this is one of those models that achieves a magical strength once completed, and with care can be picked up and moved.
 
 
[[User:Karl Horton|Karl Horton]] 22:20, 23 June 2007 (UTC)
 
 
   
 
[[Category:Polyhedron]]
 
[[Category:Polyhedron]]
  Loading editor